6.7 Powerstroke 606hp Upgrade






SKU: N/A Category: Tags: , ,


DUE TO EPA REGULATIONS This is an Emission Compliant Upgrade.  It does not alter or support any emission equipment removal.  All factory emission equipment works and performs as it was designed and tested from the factory to meet all regulations.


The EZ LYNK tuning platform is the most user-friendly flash tool we have used to load our tunes on a vehicle.  In just a few minutes you can walk through the easy to follow 3 simple steps to load custom tunes on your 2013 – 2018 Powerstroke.

NOTICE: If you are planning to or are running any other modifications on your truck I NEED TO KNOW.  Please include all modifications in the order notes. THIS IS VERY IMPORTANT or you will receive the wrong tunes and they are NON-refundable.

Coming from Industry Leader in Performance Tuning for DPF equipped Trucks! 


The 6.7L Ford in its factory trim represents a significant improvement in technology over the previous generations of the Powerstroke.  Coupled with the 6R140 transmission, this powertrain a lot of offer in reliability, driveability, and performance.  Over the past several months, we at CPS have worked with our customers and in-house on our own test trucks to develop and test tuning for this platform. After hundreds of revisions, we’re happy to announce we have a product that significantly outperforms the factory 6.7L/6R140 calibration in power, driveability while maintaining factory operation and service intervals of the emissions control system.

  • Includes Ezlynk and Support Pack (ALL TUNES)
  • SOTF switch
  • SOTF mount

2013-2014: (will not work on 2011-2012 trucks) ONLY 2013-2019

Rated from the factory at 400HP, these trucks give up a little bit from the get-go to the later 2015 and up models.  On the bright side, their low inertia dual compressor turbocharger does show up to the fight early.  This model range represents one of the quickest spooling 3/4 ton trucks we’ve ever tuned.  They respond very well to throttle input and make great power down low.  They also control smoke well with lug without polluting the emissions systems due to the great transient response from the turbo.  On the dyno, we’re able to push these models to about 480rwhp at full tilt.  With the long shaft design of the twin compressor turbo design, we’re very careful about how far we lean on the turbo so that we do not push the unit into over-speed while keeping an eye on our A/F ratio to keep regen frequency within spec.  Compare this 480rwhp number to 475 that was put down with the competitors’ full-race delete 200+ HP tune and it becomes clear pretty quickly that the emissions system is not a restriction to power.


Rated at 440HP and higher on the 17+, these are the more sought after and higher performing trucks.  The turbocharger design was simplified to a single compressor unit that uses many of the same parts as its Duramax cousin. The CP4.2 high-pressure pump was given a shot in the arm with an additional 10% capacity to match the uprated factory number.  We’ve comfortably pushed these trucks up nearly 200 HP over their stock configuration.  With nearly 600HP to the tires, they’re a treat to drive.  Also noteworthy on the late model 6.7L is the emission system tends to go much further between regens (350-500 miles).  While regen frequency is less, the time to complete the burn-off is extended.

6R140 Transmission Tuning: 

These power gains alone are impressive to drive, but what really ties the whole package together is how well with works with a tuned 6R140.  The wider torque curve coupled with a quicker torque converter lockup schedule means that you’ll feel the engine transfer its newfound torque efficiently to the tires starting at the top of the second gear.  On top of the lockup schedule, we’ve also gone through and adjusted the shift torque management alongside the shift pressure to improve the transmissions’ ability to shift positively with its newfound torque.  Our goal in the trans calibration is to provide the smoothest power transfer possible balance with the most efficient use of the engines power band.  It’s gentle when you’re taking it easy and means business when you’re on the throttle.  Our 6R140 tuning is always active once the tune is loaded.  T/H and turbine braking function are retained similar to factory function.

*** 606 WHP File can only be flashed onto 2017-2019 Year model trucks.  ALL tune files are included and it is your responsibility to flash the correct tune onto your truck.  If you have any questions please reach us in the EzLynk Chat in the APP for quick replies.

Description of the tunes relative to their position on the rotary switch:  All tunes can be switched between on the fly without stopping or turning off the vehicle.  All dyno numbers are actual measurements at the rear tire as measured in-house at CPS on our MD500 Mustang dyno.

1: Optimized Stock (+25rwhp)

This tune offers some refinement of the timing, boost, and torque limiting tables, with a small bump in overall power.  Great for loaning the truck out or towing at or above the GVWR of the vehicle.


2: Heavy Tow (+45 HP – 80 ft/lbs)

The Heavy tow tune is designed to offer the driver as much extra power and torque as can be safely used when towing up the GVWR of the truck.  EGT control on long sustained pulls as well as the ability of the trucks cooling system is taken into account.  There’s an emphasis on reliability under heavy use with this tune. (EGT Gauge always recommended for towing, do not exceed 1350 degrees F under sustained load.)


3: Light Tow (+75 HP –  110 ft/lbs)

The light tow tune is offered additional power over the heavy tow tune for when the truck is being used to haul medium and light loads.  We usually draw the line around 8K pounds in tow.  Because you’re not near the GVWR, you’re in less danger of stressing the cooling system and powertrain, therefore we allow for higher torque and horsepower output. (EGT Gauge always recommended for towing, do not exceed 1350 degrees F under sustained load.)


4: Sport Economy (2015-2018: +135 HP – 325 ft/lbs) (2013-2014: +100 HP – 300 ft/lbs)

Now we’re having fun!  When running unloaded it’s okay to kick things up a bit.  These higher power tunes will allow the truck to hold a gear longer, improve the driving experience, and generally make you happy to look for any excuse to drive your truck.  It’s important to emphasize that tune 4 and 5 should only be used on well-maintained trucks running unloaded (not towing!).


5: Race (2015-2018: +180 HP – 400ft/lbs) (2013-2014: +140 HP – 350 ft/lbs) (606WHP file for 2017-2019 trucks ONLY)

Not every day, but when you need it you need it.  It’s pretty amazing to see what a difference a tune can make.  With 606hp to the rear tires of the 2017-2019 trucks,  nearly 600 to the rear tires on the 2015-2016 trucks, and 480rwhp on the 2011-2014 trucks, they become tire-shredding monsters.  We’ve benchmarked these power levels against similarly modified deleted trucks running the highest output race tune files from our competitors and none were able to outpower us.  All of this fun in a smokeless, quiet, stealth machine that you can use for work or play.


*This product includes: Switchable 5 Tune File, Transmission Tune, Required EZ LYNK tokens, EZ Lynk AutoAgent 2.0 Hardware

*This product does not support the removal or alteration of any vehicle emission control devices.

Prop 65WARNING: Cancer & Reproductive Harm – P65Warnings.ca.gov

Additional information


13-14, 15-16, 17-19


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.